|
|
|
|
|
|
 |
HOT
STUFF™
Hot Stuff™ have a consistency resembling that of water and are used
mainly for bonding parts which fit very well. Hot Stuff™ cure time is five seconds between
tightly fitting non-porous parts.
|
|
 |
UFO™
"UFO" Odorless 'THIN' will not attack foam,making foam bonding possible
("UFO" Odorless 'THICK' is the better choice for bonding foam,
however). Fiberglass skins, right on the foam, are practical and easy
with "UFO" Odorless 'THIN'. (see detailed instructions in "HOW THEY'RE
USED") |
|
 |
SUPER
'T'™
Super 'T'™ has a consistency similar to that of syrup and has the
ability to fill small gaps between parts which don't fit perfectly.
SUPER 'T'™ cures at a slower rate than HOT STUFF™, (10-25 seconds
depending on the material). |
|
|
 |
SPECIAL
'T'™
Special 'T'™ and new UFO™ Odorless THICK are very thick cyanoacrylates
with a consistency resembling cold honey. SPECIAL 'T'™ and UFO™
Odorless THICK have greater gap-filling ability than SUPER 'T'™ and
more positioning time after contact of parts. The rate of cure is slow
enough, (usually 50-60 seconds depending on the material), to allow
precise alignment of parts, after assembly. |
|
 |
UFO™
THICK
UFO™ is odorless. Those who are sensitive to cyanoacrylate curing fumes
will enjoy using the new UFO™ in the place of Special 'T'™. UFO™
Odorless THICK will not attack foam, making foam bonding possible. NCF
HOT or MILD should be used to speed the cure. For foam, use Spray n'
Cure™ accelerator. |
|
|
|
 |
NCF
Quick™ ---this
product is lacquer, foam, and plastic friendly ---
NCF Quick™ is
used with HOT STUFF, UFO Odorless THIN, SUPER T, and UFO Odorless
THICK., and with it you can do almost magical things. Why an
accelerator when HOT STUFF & SUPER T are so fast anyway? NCF
Quick works in three ways to make HOT STUFF , SUPER 'T' and SPECIAL 'T'
EASIER, FASTER, STRONGER and able to bond some of the most unusual
materials you can think of.
EASIER
- you
decide how fast the cure should be even on pitchy woods that often take
longer to bond.
FASTER - because NCF
Quick™ contains special ingredients which prepare the bonding surface
and act as catalysts to start the thermal reaction, resulting in curing
even at low temperatures.
STRONGER
-
because the cleaner the surface is from the oils that can be found on
almost anything, due to handling or oils which are deposited naturally
from the air, the better the bond.
Part may be sprayed 3 minutes, or longer, in advance of bonding. Apply
SUPER T in a spiral pattern to other part, assemble parts, then hold
firmly for 10 seconds. |
 |
NCFM™
NCFM™ is the Mild Formula accelerator for use with HOT STUFF™, UFO™
Odorless THIN, SUPER T™, and UFO™ Odorless THICK., and with it you can
do almost magical things. Why an accelerator when HOT STUFF™ &
SUPER 'T'™ are so fast anyway? NCFM™ works in four ways to make HOT
STUFF™ , SUPER 'T'™ and SPECIAL 'T'™ easier, faster, stronger and able
to bond some of the most unusual materials you can think of. Easier -
you decide how fast the cure should be even on pitchy woods that often
take longer to bond. Faster - because NCFM™ contains special
ingredients which clean the bonding surface and act as catalysts to
start the thermal reaction, resulting in curing even at low
temperatures. Stronger - because the cleaner the surface
is from the oils that can be found on almost anything, due to handling
or oils which are deposited naturally from the air, the
better the bond. NCFM™ MAY MELT SOME EXPANDED FOAM PRODUCTS. |
 |
NCF™
NCF is an extremely fast acting accelerator for all instant glues.
"NCF" does everything NCFM" will do, (see "NCFM" details), in a
fraction of the time. "NCF" has an extraordinary on-part life. Apply to
one part only. Part may be sprayed up to 8 minutes in advance of
bonding. Apply SUPER'T' in a spiral pattern to other part, assemble
parts, then hold firmly for 10 seconds. |
 |
SPRAY'N
CURE™
Spray'N Cure™ is completely FREE of all chlorinated and fluorinated
solvents. Spray'N Cure™ works similar to NCFM™. It has a 2 minute
on-part life after the area is completely dry.
Special Note:
Because SPRAY 'N CURE™ has no chlorinated and fluorinated solvents,
user must allow 50 to 60 seconds (at room temperature) for complete
drying before bonding, white foam friendly. |
|
|
| |
 |
SUPER
SOLVENT™
Ultra Solvent™ is a remarkable debonder and cleaner for any instant
glue. Use it for hand clean-up when ever you are manipulating small
parts with your fingertips (instant glues make a thin, hard shell when
cured on fingertips, reducing one's ability to work skillfully with
tiny pieces) or just to get it off at the end of the day. Use Ultra
Solvent™ to remove instant glue from most clothing and surfaces. Some
fabric, colorings or materials may be affected, so test-patch on an
inconspicuous place. Ultra Solvent™ is not a
thinner for instant glue. |
|
PRO
TIPS
Pro Tips slip over the spout to
allow even more precise application of our glues than the spouts that
come with the bottle. A Pro Tip has the same diameter from
its base to the tip, so that if it clogs and you have to cut it down,
it will still apply the glue just as precisely. Each box
comes with twelve Pro Tips.
|
|
HOT
TIPS
Hot Tips are the replacement spouts and overcaps for our glue
bottles. If you are having problems with spouts clogging,
first click on the "Tips" link on the side and check out the "Clogging"
section to see some clog-prevention methods. However,
sometimes you can't control the situation that is causing your spouts
to clog. If that's the case, we offer replacement spouts and
overcaps, two sets per box.
|
|
SPRAY
PUMPS
Replacement spray pumps for the
NCF-2, NCF-5, NCF-2M, and NCF-5M bottles are available, two pumps per
box. |
|
|
|
